User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-53
Softkey Menu Field
Softkey Menu 1
• Release: Executes call Release from the Tester.
• Clear Status: Clears Pass/Fail results at signaling steps in the
test flow.
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
•The
Sing mode setting provides single
measurement.
•The
Cont mode setting provides
continuous measurement.
•To start continuous measurement, change
the trigger mode from
Sing to Cont.
• Trigger: Starts single measurement.
• More (1 of 2): Displays the softkey menu 2
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• Spectrum Monitor: Displays the Spectrum Monitor screen.
• More (2 of 2): Returns to the softkey menu 1.
Screen Field
The following input field in the screen field can be changed on
the [Measuring] screens. Change the input fields according to
Table 5-16.
Table 5-16 [Manual Test: Stand-by] Screen GSM Mode Input Field
Input Field Description
Measuring
mode
Sets whether or not to execute each group of test items. Select On or Off.
• Peak TX Power, Burst Timing, Power Ramp
• Phase Error (RMS), Phase Error (Peak), Frequency Error
• Sens/BER II, Sens/FER (Sens: sensitivity)