User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-51
The following test result is shown in the test result field of the
MS Call step.
• P: Shown on blue background when a proper call setup is
executed and MS Call is passed.
• F: Shown on red background when MS Call is failed.
When one of above procedure is performed, the screen changes
from [Stand-by] screen to [Measuring] screen and a test starts.
Connection Screen
When call connection between the mobile phone and the Tester
is succeeded, a [Measuring] connection screen as Figure 5-31 or
Figure 5-32 is displayed.
If the trigger mode is set to
Cont, continuous measurement of
RF test starts as soon as a [Measuring] connection screen is
displayed.
Until the measurement starts, the Tester loops back voice from
the mobile phone.
Figure 5-30 [Manual Test: Measuring] MS Call Screen