User manual

5-50 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Message Field
The following message is displayed in the message field on the
[Stand-by] screen:
Press {Location Update}, {BS Call} or dial and call from the mobile.
The word surrounded by {} in the message field denotes the
softkey.
Explanation
To start a test, turn the mobile phone on and wait for location
update is passed automatically. P is shown on blue background
at the test result cell of Location Update step when location
update is passed.
After that, there are two ways to continue the test process.
Press the BS Call softkey. The BS Call step is highlighted. Then,
the following test result is shown in the test result field of the BS
Call step.
• P: Shown on blue background when call setup is executed
properly and BS Call is passed.
• F: Shown on red background when BS Call is failed.
Dial and press the Off Hook button on the mobile phone. The MS
Call step is highlighted. Then, the following test result is shown
in the test result field of the MS Call step.