User manual

5-46 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Test S I M
Insert the Test SIM provided by Agilent in the mobile phone
before performing any test because the Tester will not be able to
perform measurements with a SIM that is provided by cell
phone operator or other Test SIMs.
Stand-by Screen
When the Manual Test softkey is pressed on the [Initial] screen,
the [Manual Test: Stand-by] screen as Figure 5-29 is displayed.
Softkey Menu Field
Softkey Menu 1
• Location Update: Executes the Location Update process for the
Tester.
• BS Call: Executes BS Call.
• Clear Status: Clears Pass/Fail results at signaling steps in the
test flow.
• Trigger Sing/Cont: Selects the trigger mode from
Sing (single)
and
Cont (continuous).
Figure 5-29 [Manual Test: Stand-by] GSM Mode Screen