User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-45
Manual Test (GSM Mode)
Feature of Manual Test
• All test items are executed while the mobile phone and the
Tester are connected by call control protocol.
• Measurement in the Talk/RF test step in the test flow is
executed in a real-time.
Setting for Manual Test in the Configuration Mode
• Loss:
The path loss values for each radio system can be set on the
[Configuration] screen to correct the RF attenuation
between the mobile phone and the Tester.
• Limits of measurement items:
Each measurement item can be measured and analyzed with
test limits set on the [Configuration: Test Condition] screen.
BER (Class II) Measured BER and the HI Limit are shown. The HI Limit is set on the [Configuration: Test Condition]
screen.
FER Measured FER and the HI Limit are shown. The HI Limit is set on the [Configuration: Test Condition]
screen.
RX Quality RX Quality measured with the mobile phone, the HI and the LO Limit are shown. The HI and the LO
Limit are set on the [Configuration: Test Condition] screen.
RX Level RX Level measured with the mobile phone, the HI and the LO Limit are shown. The HI and the LO
Limit are set on the [Configuration: Test Condition] screen.
Table 5-12 [Automatic Test] Phase Error/Frequency Error Screen Field
Screen Field Description
NOTE
The default state is the last setting stored in the internal memory of the
Tester before power off.
For numeric value entry, The changing magnification softkey is available.
Refer to Storing Numeric Values on page 8 and Changing Magnification
Softkey on page 13.