User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-43
Sensitivity/ RX Quality/ RX Level
This function measures and analyzes the received sensitivity in
the BER (bit error rate) and FER (frame error rate) formats
using the loop back function of the mobile phone.
Also, measurement result for RX Quality and RX Level, which
are measured with the mobile phone and reported as
measurement reports, are shown.
The measurement data of BER, FER, RX Quality and RX Level
are shown as Figure 5-28.
Any data indicating a failure is highlighted.
Table 5-11 [Automatic Test] Phase Error/Frequency Error Screen Field
Screen Field Description
RMS Measured Phase Error (RMS) and the HI Limit are shown. The HI Limit is set on the [Configuration: Test
Condition] screen.
Phase Peak Measured Phase Error (Peak), the HI and the LO Limit are shown. A set of the HI and the LO Limit is set
on the [Configuration: Test Condition] screen.
Marker Measured Phase Error at the marker position, the HI and the LO Limit are shown.
Measured data is shown when the marker is placed on the measurement trace.
The HI Limit is set on the [Configuration: Test Condition] screen.
Frequency Measured Frequency Error, the HI and the LO Limit are shown. The HI and the LO Limit are set on the
[Configuration: Test Condition] screen.