User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-41
Screen Field
The measurement results are shown in the screen field.
Phase Error/ Frequency Error
This function measures and analyzes the RMS and peak phase
errors and frequency error over the active part of the timeslot
between
0 to 147 bits.
The measurement data for RMS Phase Error, Peak Phase Error,
and Frequency Error are shown with enlarged numerals as
Figure 5-27.
If the measured data exceeds the limits in the graph, one or
more white triangle markers indicate the failed position at the
top of the graph frame.
Any data indicating a failure is highlighted.
NOTE
A Pass/Fail judgment is not given while transmission power is off.
Table 5-10 [Automatic Test] Burst Timing/Power Ramp Screen Field
Screen Field Description
Burst Timing Measured Burst Timing, the HI and the LO Limit are shown. The HI and the LO Limit are set on the
[Configuration: Test Condition] screen.
Power Ramp Measured Power Ramp, the HI and the LO Limit are shown. The Limits are specified by the radio system
selected (template).