User manual

5-36 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
The information from the mobile phone as Table 5-8 is displayed
in the screen field.
Message Field
The following message is displayed in the message field on the
[Stand-by] screen:
Press {Start} to begin a test.
The word surrounded by {} in the message field denotes the
softkey.
Procedure to Obtain a Graph/Value Screen from the Summary
Detailed Screen or the Summary Value Screen
Display a Graph/Value screen containing detailed test results
with the following procedure:
Step 1
Place the circular cursor at one of Pass/Fail result cells or
measurement value cells in the measurement result field by
rotating the CURSOR CONTROL knob.
Step 2
Select the measurement result cell by pressing the CURSOR
CONTROL knob one time.
Table 5-8 [Automatic Test: Measuring] Screen Mobile Phone Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity from the mobile phone.
IMEI Displays the International Mobile station Equipment Identity from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call execution. The set value is displayed
at this state.
Dialed No. Displays the number dialed from the mobile phone.
Power Class Displays power class information of the mobile phone. Refer to Power Classes on page 2.
GSM Version Displays either Phase 1 or Phase 2 defined by the mobile phone.
STG-PTN Displays signaling pattern. The value set in the [Condition: Test Condition] screen is inserted.