User manual

5-32 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Summary Screen
When all tests in preset sequences are completed, measurement
results are displayed on the [Stand-by] summary simplified
screen (Figure 5-21), the [Stand-by] summary detailed screen
(Figure 5-22) or the [Stand-by] summary value screen
(Figure 5-23) depending on the previous setting of the Simple,
the Detail or the Value softkey.
Measurement results are shown as follows:
•
Pass or measurement value: Shown on blue background
when the measurement is passed.
•
Fail or measurement value: Shown on red background when
the measurement is failed.
Measurement result is shown in different ways depending on
the display mode.
• On the summary simplified screen, an enlarged
Pass is
shown in the middle of the measurement result field when all
measurement items are passed. An enlarged
Fail is shown
when even one measurement item is failed.
• On the summary detailed screen, a Pass or Fail measurement
result is shown at each item cell in the measurement result
field.
• On the summary value screen, a measurement value is
shown at each item cell in the measurement result field.
When some signaling test items and measurement items are set
to be skipped on the [Configuration: Test Condition] screen,
each result of test items and measurement items is shown by –
or —.