User manual

5-28 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
• Value: Displays a measurement value at each item cell in the
measurement result field.
• Cancel: Cancels changing the display mode and returns to the
softkey menu 1.
Screen fields
During the test, the operator must respond to operation or
Tester messages by pressing the appropriate softkeys of the
Tester or by pressing the mobile phone's button.
The information from the mobile phone is displayed at the
upper right corner in the screen field. Refer to Table 5-6
[Automatic Test: Measuring] Screen Mobile Phone Information
on page 25.
Message Field
The following message is displayed in the message field during
Talk test on [Measuring] Talk screens:
Press {Pass} or {Fail} for Voice Echo test.
The word surrounded by {} in the message field denotes the
softkey.
Aborted screen
When the Abort softkey is pressed, the measurement is aborted.
Any of the [Automatic Test: Stand-by] aborted simplified
screen, the [Automatic Test: Stand-by] aborted detailed screen,
or the [Automatic Test: Measuring] aborted value screen is
displayed, depending on the previous setting of the Simple, the
Detail or the Value softkey. Figure 5-19 is a screen with the Simple
softkey setting.