User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-25
Screen Field
The information from the mobile phone as Table 5-6 is displayed
in the screen field
Message Field
The following message is displayed on [Measuring] screens:
Press the desired softkey.
Measuring Talk Screen
During Talk step execution, a [Measuring] Talk screen is
displayed.
Any of the [Automatic Test: Measuring] Talk simple screen
(Figure 5-16), the [Automatic Test: Measuring] Talk detailed
screen (Figure 5-17), or the [Automatic Test: Measuring] Talk
value screen (Figure 5-18) is displayed, according to the setting
of the Simple, the Detail or the Value softkey.
Table 5-6 [Automatic Test: Measuring] Screen Mobile Phone Information
Item Information Description
IMSI Displays the International Mobile Subscriber Identity from the mobile phone.
IMEI Displays the International Mobile station Equipment Identity from the mobile phone.
Caller ID Displays addresser number sent from the Tester at BS Call execution. The set value is displayed
at this state.
Dialed No. Displays the number dialed from the mobile phone.
Power Class Displays power class information of the mobile phone. Refer to Power Classes on page 2.
GSM Version Displays either Phase 1 or Phase 2 defined by the mobile phone.
SIG-PTN Displays signaling pattern. The value set in the [Condition: Test Condition] screen is inserted.