User manual

5-12 N9360A Multi UE Tester GSM User Manual
5 Screen Reference
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a graphic
file of the screen in a USB memory device
depending on the setting of the Printer input
field on the [Configuration] screen.
• Update SYSTEM: Updates system. This softkey is activated
when this screen is selected while the USB
memory device containing the system
renewal is inserted. Reboot is required
depending on the content of update after
update of the system renewal.
• More (2 of 2): Returns to the softkey menu 1.
Message Field
The following messages are displayed depending on the state:
• Press [Update xxxx] to update. (This message is displayed
if any firmware exists in the USB memory.)
• USB memory is not inserted.
• No update file exists in the inserted USB memory device.
• Processing… [Don't remove a USB memory!]
• Completed!
• FW-Update failed [Error number]
Initial Screen
After selecting a system, the [Initial] screen as Figure 5-8 is
displayed.
This screen is used to select one of the function modes or to
return to the [Top Menu] screen.
To return to the [Initial] screen from any function mode, press
the
Return softkey (multiple times if necessary).
NOTE
Before pressing the FW Update softkey, be sure that the proper USB
memory device for firmware update is inserted in the USB connector.