User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-9
Option Installation/Backup
Installation/Backup of options such as G00 and W00 can be
controlled on the [Configuration] screen.
Option Installation
Before the installing options, prepare the USB memory device
containing a suitable Option Key.
Step 1
Press the Config softkey on the [Top menu] screen to display
[Configuration] screen of the Figure 5-4.
Step 2
Insert USB memory device containing the Option Key into the
USB connector on the front panel of the Tester.
Step 3
Press the Option Install softkey.
Step 4
Confirm an option number is added on the Option field of the
screen, and remove the memory device from the tester.
Option Backup
Prepare the USB memory device containing a suitable Option
Key to backup the option.
Step 1
Press the Config softkey on the [Top menu] screen to display
[Configuration] screen of the Figure 5-4.
NOTE
To install options, the option key suitable for required option is necessary.
For further information, contact the Agilent Sales Department or an
authorized distributor.