User manual

Screen Reference 5
N9360A Multi UE Tester GSM User Manual 5-5
Screen Field
The firmware name, revision number currently installed, and
serial number are shown.
Message Field
The following message is displayed in the message field:
Select a Radio System or Configuration.
Configuration Screen
When the Config softkey is pressed on the [Top Menu] screen, the
[Configuration] screen as Figure 5-4 is displayed.
The following various conditions are set on this screen.
• Reference signal internal/external changing
• External control relevant to I/F
• Date and Time
• Printer
• Key confirmation beep
• AutoBoot
NOTE
When the Autoboot function is set to GSM or WCDMA and not to None, the
Tester will automatically enter the GSM or W-CDMA system mode, if no
softkey is pressed within the specified time (10 to 60 seconds). When the
Tester is shipped, the AutoBoot function is set to
None. For details, see
AutoBoot on page 8.