User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-87
Ending a Test
Disconnecting the Mobile Phone
Disconnect the mobile phone from the connection cable or the
antenna coupler.
Remove the Test SIM card from the mobile phone.
Operation after End of a Test
Turning off the Tester
Turn off the Tester with the following procedure:
Step 1
Press the LINE switch on the front panel of the Tester for more
than one second.
Step 2
The display blacks out, and the LINE LED on the front panel is
lit in orange.
Step 3
The power is turned off except the reference oscillator in the
Tester.
Step 4
Turn off the Line switch on the rear panel of the Tester to turn
off the reference oscillator.
Step 5
Every power including the reference oscillator is turned off and
the LINE LED goes off.
CAUTION
Do not turn off the Line switch on the rear panel of the Tester while
the LINE LED on the front panel of the Tester is lit in green.
Otherwise, Tester failure may occur.