User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-83
Step 14
Press the Trigger softkey to measure spectrum in single mode, or
the Trigger Sing/Cont softkey to measure the spectrum in
continuous mode.
Step 15
Press the Return softkey to return to the previous screen.
Testing a Mobile Phone by Signal Generator
This section describes the operation method of the Tester for a
test by the Signal Generator.
Step 1
Turn on the Tester and select the GSM system on the [Top
Menu] screen. Refer to Selection of System on page 13 for
selecting a system.
Figure 4-73 [Stand-by] Spectrum Monitor Screen