User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-79
Step 8
Set the mobile phone to transmit the bursted RF signal.
Step 9
Start a test with the following softkey operation.
• Trigger Sing/Cont: When the trigger mode is
Sing, single
measurement will start after the Trigger
softkey is pressed. To change the trigger
mode to
Cont in order to start continuous
measurement, press the Trigger Sing/Cont
softkey. When the trigger mode is
Cont,
continuous measurement starts as soon
as the [TX Analyzer: Stand-by] screen is
displayed.
• Trigger: Starts single measurement.
Figure 4-69 [TX Analyzer: Stand-by] Screen