User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-75
Step 18
Press the Trigger softkey to measure spectrum in single mode, or
the Trigger Sing/Cont softkey to measure the spectrum in
continuous mode.
Step 19
Press the Return softkey to return to the previous screen.
Step 20
Press the End softkey to finish the test.
Testing a Mobile Phone by TX Analyzer
This section describes the operation method of the Tester for a
test by the TX Analyzer.
Figure 4-65 [Measuring] Spectrum Monitor Screen (EGPRS Mode)