User manual

Operating Procedures 4
N9360A Multi UE Tester GSM User Manual 4-73
Step 16
Press a softkey as needed.
Knob Cur/Marker: Selects the cursor or the marker.
Marker Coar/Fine: Selects the marker control from
Coar (coarse)
and
Fine to move the marker with 10 dots
(coarse) or 1 dot (fine) resolution. The
marker readout for the amplitude and
timeslot (in bits) is available at any point of
the measurement trace.
Zoom Off/On: Selects the zoom mode from
On and Off.
Trigger Sing/Cont: Selects the trigger mode from
Sing to Cont.
•When the trigger mode is
Sing, single
measurement starts after the Trigger softkey
is pressed.
•To change the trigger mode to
Cont in order
to start continuous measurement, press the
Trigger Sing/Cont softkey.
Trigger: Starts single measurement when the trigger mode is set
to
Sing.
Figure 4-63 [Measuring] Graph/Value Screen (EGPRS Mode)