User manual

4-70 N9360A Multi UE Tester GSM User Manual
4 Operating Procedures
Step 12
When the attached process is succeeded, the Tester waits for
the trigger.
• When the trigger mode is
Sing, single measurement will start
after the Trigger softkey is pressed.
• To change the trigger mode to
Cont in order to start
continuous measurement, press the Tri gger Sing/Cont softkey.
The [Manual Test: Measuring] connected screen is displayed
as Figure 4-61.
Figure 4-60 [Measuring] Attached Screen (EGPRS Mode)