User manual

Operating Procedure 4
N9360A Multi UE Tester CDMA2000 User Manual 4-61
14
When measuring Code Domain Power, press the More (1 of 3)
and Code Power softkeys to display the Code Domain Power
measurement screen. Perform Code Domain Power
measurement in accordance with the trigger mode setting
described below.
• If the trigger mode is set to
Cont (continuous), continuous
measurement starts immediately.
• If the trigger mode is set to
Sing (single), press Tr igger
softkey to start single measurement.
Figure 4-51 [Manual Test: Measuring] Max & Min TX Power Screen (1xEV-DO)