User manual

4-46 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
Tests using 1xEV-DO Mode(Option C02)
Testing a Dual Band Mobile Phone by Automatic Test
(1xEV-DO Mode)
This section describes the operation method of the Tester and a
dual band (B1:PCS US and B0:Cel US) mobile phone under the
test by Automatic Test 1xEV-DO mode. The handoff from the
B1:PCS US and B0:Cel US is performed during the test. Set the
mobile phone to 1xEV-DO Only mode before measurement.
1 Turn on the Tester and select the cdma2000 system on the
[Top Menu] screen. Refer to Selection of System on
page 4-14.
2 The [Initial] screen as Figure 4-35 is displayed after
completion of initialization and self-test routine of the Tester.
Figure 4-35 [Initial] Screen