User manual

Operating Procedure 4

N9360A Multi UE Tester CDMA2000 User Manual 4-43

Handoff

Softer Handoff

1 Follow the process of step 1 to step 13 of Testing a Dual Band

Mobile Phone by Manual Test (MC-1x Mode) and set the

mobile phone to call connection status.

2 Press the More (1 of 2) and Softer Handoff softkeys to start

Softer handoff. The Softer Handoff step is highlighted. When

the handoff is completed, P is shown at the Softer Handoff

step.

3 Release the call with the following operation.

• BS release: Press the Release softkey.

• MS release: Press the On Hook button on the mobile

phone.

After the release process is completed, the screen is returned

to the [Stand-by] screen.

Hard Handoff

1 Follow the process of step 1 to step 13 of Testing a Dual Band

Mobile Phone by Manual Test (MC-1x Mode) and set the

mobile phone to call connection status.

2 Change the channel with the following operation.

• Move the cursor to the RFCH input field and press the

CURSOR CONTROL knob.

• Rotate the CURSOR CONTROL knob to select the channel

for handoff and press the CURSOR CONTROL knob again.

When the channel in the same band is selected, the Hard

Handoff step is highlighted. When the channel in the

different band is selected, Band Handoff step is highlighted

and the channel is changed to the selected one.