User manual

4-30 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
14
Press the Start softkey to start a test. A screen status changes
from Stand-by to Measuring.
15 Turn the mobile phone on. Wait for the mobile phone to camp
on, and P is shown at the Location Update step.
16 At the MS Call step, make a call from the mobile phone. Dial
an arbitrary number and press the Off Hook button on the
mobile phone.
17 At the Ta lk step, check the quality of loop back voice and
press the Pass or the Fail softkey according to its result.
18 At the MS Release step, press the Off Hook button on the
mobile phone to terminate the call from the mobile phone.
19 At the BS Call (Talk) step, press the Off Hook button on the
mobile phone to respond to the call from the Tester.
Figure 4-22 [Automatic Test: Stand-by] Value Screen (MC-1x)