User manual

4-28 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
5
Set CDMA2000 MC-1x in Radio System 1 and 2, and set
other fields as shown in Figure 4-18 and Figure 4-19.
6 Set Run at test item field which you want to execute in the
test flow. Set
Run at measurement item cell which you want
to measure in the measurement item table.
7 Press the Return and then the Te s t C on d iti o n softkey to display
the [Configuration: Test Condition] screen as Figure 4-20 to
set the test condition.
8 Set the fields of the test parameters as shown in the left and
upper right side of Figure 4-20 with the CURSOR CONTROL
knob.
9 Repeat step 8 to set the test condition for Cel US after
replacing B1:PCS US to B0:Cel US at the Band field.
10 Press the Limit softkey to display the [Configuration: Test
Condition (Limit)] Screen as Figure 4-21.
Figure 4-20 [Configuration: Test Condition] Screen