User manual

4-18 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
• Config: Displays the [Configuration] screen to set
parameters. Refer to Configuration.
Softkey menu 2
• Print Screen: Prints the screen hard-copy or stores the
screen image in the USB memory device, according to the
Printer field setting on the [Configuration] screen.
• Return to Menu: This softkey is not for selecting a function
mode. The screen returns to the [Top Menu] screen when
this softkey is pressed. Refer to Return to Menu Screen for
detail.
• More (2 of 2): Returns to the Softkey Menu 1.
Softkey menu 3
• MC-1x: Changes to the MC-1x mode of the CDMA Mode. The
C01 option is required.
• 1xEV-DO: Changes to the 1xEV-DO mode of the CDMA Mode.
The C01 and C02 options are required.
• Cancel: Cancels selecting the mode and returns to the
Softkey Menu 1.
Selection of Protocol Revision
The 3GPP2 Config on the [Configuration: Test Condition] screen
sets the MC-1x and 1xEV-DO protocol revision.
The relationship of MC-1x and 1xEV-DO protocol revision and
the 3GPP2 Config setting is shown in Table 4-2.
Table 4-2 Relationship of MC-1x/1xEV-DO protocol and 3GPP2 Config
3GPP2
Config
MC-1x protocol 1xEV-DO protocol
1 Release 0 (Rel. 0) Release 0 (Rel. 0)
2 Release A (Rel. A)
3 Release 0 (Rel. 0) Revision A (Rev. A)
4 Release A (Rel. A)