User manual

Operating Procedure 4
N9360A Multi UE Tester CDMA2000 User Manual 4-17
Selection of the Function Mode on the Initial Screen
Press one of the softkeys to select a function mode.
Softkey Menu Field
Softkey menu 1
• Automatic Test: Starts the Automatic Test. Refer to Testing
a Dual Band Mobile Phone by Automatic Test (MC-1x
Mode) and Tests using 1xEV-DO Mode(Option C02).
• Manual Test: Starts the Manual Test. Refer to Testing a Dual
Band Mobile Phone by Manual Test (MC-1x Mode), Tes ti ng
a Dual Band Mobile Phone by Manual Test (1xEV-DO Mode).
• TX Analyzer: Displays the [TX Analyzer] screen. Refer to TX
Analyzer.
• Signal Generator: Displays the Signal Generator. Refer to
Signal Generator.
• CDMA Mode>>: Shifts the system to CDMA Mode. The Sub
Softkey is displayed on the screen and you can change the
mode to MC-1x or 1xEV-DO when this softkey is pressed.
The C02 option is required to install.
• More (1 of 2): Displays the softkey menu 2.
Figure 4-13 [Initial] Screen MC-1x Mode