User manual

Operating Procedure 4
N9360A Multi UE Tester CDMA2000 User Manual 4-15
2
Press the CDMA2000 softkey to select the cdma2000 system.
The [Initial] screen for cdma2000 is displayed after the
Tester completes its initialization and self-test
routine.Figure 4-11 shows the [Initial] screen of the MC-1x
mode. When shifting the 1xEV-DO mode, press the CDMA
Mode>>, 1xEV-DO softkey. (See Figure 4-12) Or, specify the
CDMA Mode field on the [Configuration: Test Condition]
screen obtained to press the Config and Test C o n dition
softkeys.
Figure 4-11 [Initial] Screen MC-1x Mode