User manual

Operating Procedure 4
N9360A Multi UE Tester CDMA2000 User Manual 4-11
4
Press the Store Value to Memory >> softkey. The softkey menu
including Memory 1, Memory 2, Memory 3 and Memory 4
softkeys as shown in Figure 4-7.
5 Press one of the memory softkeys from Memory 1 to Memory 4
where you desire to store that value.
6 The memory softkey menu returns to the state in step 2
showing the value newly stored.
7 Press the CURSOR CONTROL knob to set the value into the
field. The softkey menu returns to that of step 1.
8 Repeat the procedure from step 1 to step 7, if required.
Figure 4-7 Memory Function