User manual

Operating Procedure 4
N9360A Multi UE Tester CDMA2000 User Manual 4-7
Test Procedure
Activating the Tester
To activate the Tester, turn on the LINE switch on the rear
panel of the Tester and press the LINE switch on the front
panel.
General Operation
Display Annotation
Depending on functions and test situations, there are several
types of screen. Figure 4-5 shows the common areas on the
typical screen.
NOTE
Provide warm up of 30 minutes or more to ensure correct measurement.
Figure 4-5 Display Annotation
Press [Start] to begin a test.
Automatic
Test
2037/12/31 23:59
① ② ③
④
⑤
Stand-by
⑥
b) Test Results
a) Test Flow
c) Measurement Item
d) Measurement Result
e) Input Field