User manual

4-2 N9360A Multi UE Tester CDMA2000 User Manual
4 Operating Procedure
Test Flow
This section describes a test flow to inspect the Mobile Unit
with the CDMA2000 Option (MC-1x mode: Option C01, 1xEV-DO
mode: Option C02).
Figure 4-1 shows the test operation flow.
Subsequently, the mobile phone operation method is described
according to the test flow.
Figure 4-1 Tes t F l ow
Selection of the Function Mode on
the Initial Screen
Testing a Dual Band Mobile Phone by
Manual Test (MC-1x mode)
Testing a Mobile Phone by TX Analyzer
2.3.4
Testing a Dual Band Mobile Phone by
Manual Test (1xEV-DO mode)
Ending a Test
Testing a Dual Band Mobile Phone by
Automatic Test (MC-1x mode)
Testing a Dual Band Mobile Phone by
Automatic Test (1xEV-DO mode)
2.3.6
2.3.7
2.3.10
2.3.13
2.3.14
2.4
Testing a Mobile Phone by Signal Generator
2.3.11
Activating the Tester
2.3.1
2.3.3
Selection of System
Installing the Test SIM
System Requirement
2.2.2
2.2.1
cdma2000 WCDMAGSM
W-CDMA System
Refer to
the NJZ-2000
Multisystem
UE Tester
W-CDMA Option
User's Guide
GSM System
Refer to
the NJZ-2000
Multisystem
UE Tester
GSM Option
User's Guide