User manual

D-2 N9360A Multi UE Tester CDMA2000 User Manual
D Appendix D Parameters of physical channels
Table D-5 Details of the modulation set value in TX Analyzer and Signal Generator
Set value Modulation
Method
Remark
MC-1x Pilot Only — Code Channel
• Pilot CH (0 dB)
Pilot+Sync+Pch+OCNS+Fch — Code Channel
• Pilot CH (-7 dB)
• Sync CH (-16 dB)
• Paging CH (-12 dB)
• FCH (-7.4 dB)
• OCNS
Radio Config: F3R3
FCH Data Rate: 9.6 kbps
Pilot+Sync+Pch+OCNS+Fch+Sch — Code Channel
• Pilot CH (-7 dB)
• Sync CH (-16 dB)
• Paging CH (-12 dB)
• FCH (-7 dB)
• SCH
• OCNS
Radio Config: F3R3
SCH Data Rate, Encode, Level:
Depends on setting value of
[Configure: Test Condition]
screen. (Preset value: 9.6 kbps,
Convolutional Encoder, -3.5 dB)
1xEV-DO Cont Pilot — Code Channel
• Pilot CH (Continuously
transmits Pilot Channel)
Pilot+MAC+Control — Code Channel
• Pilot CH
• MAC RA
• Control CH