User manual

Appendix A Input Items and Allowable Options or Ranges A
N9360A Multi UE Tester CDMA2000 User Manual A-15
Test Sequence
(continued)
MC-1x
(continued)
Sequence
No. 2
(continued)
Sensitivity/FER
Execution/non-execution selection
— | Run
ATT In -9.9 to +9.9
1xEV-DO Sequence No. 1 CDMA2000 1xEV-DO
Sequence No. 2 CDMA2000 1xEV-DO|
————
Sequence No. 1 to 2
RF Output Auto| On
3GPP System 1 to 9
Sequence
No.1
RF Test
Execution/non-execution selection
— | Run
Softer Handoff
Execution/non-execution selection
— | Run
Band 0| 1| 3| 4| 6| 15
B0:Cel US
B1:PCSUS
B3:Cel JP
B4:PCSKR
B6:IMT-2K
B15: AWS
1
BS Level
(Access Probe Power)
-115.0 to -18.0
Measurement BS Level
Max TX Power BS Level
Min TX Power BS Level
3GPP2 Config 1, 2: PER
BS Level1, 2
3GPP2 Config 3, 4: PER
BS Level1, 2, 3
Wait before paging 0.0 to 99.9
UATI Assignment Timeout 5 to 300
RFCH
(Band + Channel)
BAND 0 (Cel US): 1024 to
1323, 991 to 1023, 1 to 799
|BAND 1 (PCS US): 0 to
1199| BAND 3 (Cel JP):
1041 to 1199, 1201 to 1600,
801 to 1039, 1 to 799
|BAND 4 (PCS KR): 0 to
599 |BAND 6 (IMT-2K): 0 to
1199 BAND 15
1
(AWS):
0~899
Access Probe Power
execution/non-execution selection
— | Run
Table A-1 Input fields and allowance choices or ranges (continued)
Screen Set Item Set Value