User manual

Overview 3
N9360A Multi UE Tester CDMA2000 User Manual 3-5
Extensive Interface Options
The N9360A Tester offers various interface options including
Ethernet, USB, GP-IB (Option E02) and Serial (Option E01). The
USB ports are offered to connect a printer, a USB-GPIB
converter (Option E02), or a USB memory device for firmware
update or parameter saving/recalling. Ethernet, GP-IB, and
Serial are used for remote control.
External Control Function (Remote Control)
Remote control is available using Ethernet, USB-GPIB converter
(Option E02) or Serial (Option E01). Each interface port uses
the same commands. User can select the most appropriate
option from these selections.
5-band Handover
Handover is executed through all channels of five bands while
being connected. This function is available if the mobile phone
supports the bands and channels to be hand overed.
Configuration
Table 3-2 shows the configuration of the Tester. Check the
components before using the Tester.
Table 3-2 Configuration
Item name Type Quantity Remarks
cdma2000 Option C00, C01, C02 1 Installed on the Tester
User Manual 1
Programming Manual 1
Quick Reference 1
Installation Guide 1
Inspection Data 1
Certificate of Calibration — 1