User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-195
A changing magnification softkey is available. Refer to Storing Numeric Values on page 4-10 and Changing Magnification Softkey on
page 4-13.
In addition, this screen displays the following information:
MAC address
Status: Shows how each address is configured.
• If any abnormality is detected in the IP Addr/Mask
setting, Invalid is displayed.
• If any abnormality is detected in the Default Gateway
setting, Invalid is displayed.
• If the Tester and the Default Gateway does not belong to
the same network, Unreachable is displayed.
CIDR Set masks (in CIDR format) for Setting 1 through 5. Possible values are as follows:
Possible values for CIDR:
• None|1 to 31
• If the CIDR is set to None, the value that is set in Host/Net will be treated as a Host
address.
• If the CIDR is set to other than None, the value that is set in Host/Net will be treated as
a Net address.
• If the Gateway setting is disabled when booting, None will be displayed in the CIDR
section.
• Changes to the mask setting is effective after pressing the Apply Address softkey. Refer
to Appendix A Input Items and Allowable Options or Ranges for details.
Table 5-54[Configuration: Network Setting] screen (continued)
Input Item Description