User manual

5-192 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Configuration: Network Setting
When the Network Setting softkey on the [Configuration] screen
is pressed, the [Network Setting] screen as shown in Figure 5-92
appears.
Softkey Menu Field
Softkey Menu
• Print Screen: Prints the hard-copy of the screen or stores
the screen image in the USB memory, according to the
Printer setting on the [Configuration] screen.
• Apply Address: Applies the changes in IP Addr, Mask, Default
Gateway, Host/Net, Gateway, and CIDR to the Tester. The
softkeys on the [Network Setting] screen that is in the
initial display state are not available. They become
available when the changes to the settings are detected,
and become unavailable again when the address
configuration is finished.
• Cancel: Returns to the [Configuration] screen. Restore set
values before pressing the Apply Address softkey to those
before the change.
Figure 5-92 [Configuration: Network Setting] screen