User manual

3-4 N9360A Multi UE Tester CDMA2000 User Manual
3 Overview
1. The measurement is valid only when the Radio Configuration is set to F3R3, F4R3 and
F5R4 and the Service Option is set to 32.
2. The measurement is valid only when the Radio Configuration is set to F3R3, F4R3 and
F5R4.
3. The measurement is valid only when the 3GPP2 Config is set to 3 or 4 (1xEV-DO Rev.
A).
Features
Easy-to-operate Automatic Test
The N9360A Multi UE Tester offers automatic test procedure
from protocol to the radio performance tests are executed
automatically with easy operation. Each test item in Automatic
Test can be set to either
On or Off. Testing time can be
shortened by eliminating unnecessary test items.
Reducing Operation Time
In Automatic Test, preset traffic channels are automatically
handed over. Consequently, restarting for each traffic channel is
not required and testing time can be shortened.
Various Test Functions
The N9360A Tester, which is equipped with the Automatic Test,
Manual Test, and Signal Generator, can be used for a wide
variety of measurement operations.
Remote Control Ethernet
Serial (Option E01)
GP-IB (Option E02)
Table 3-1 Main Functions
Option Function