User manual

5-190 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Softkey Menu Field
Softkey Menu
• Undo Now HDD: Restores all the test parameter files in the
HDD before the file replace operation was executed. After
this operation, all existing test parameter files in the HDD
are deleted.
• Cancel: Cancels Undo and returns to the [Configuration:
File Management] screen as Figure 5-75.
Screen Field
The following message appears in the message display area.
Previous procedure files, which are the files before File
Replace HDD
<– USB operation, are restored into the hard
desk.
When this operation is done, all existing procedure files in
the hard disk are deleted.
Undo Confirmation screen (when USB memory selected)
You can restore all replaced files using Undo function when you
replaced all the test parameter files from the HDD to a USB
memory device. Select the USB with the HDD/USB softkey, and
then, press the More (1 of 2) and Undo softkeys on the
[Configuration: File Management] screen. Undo Screen (USB
memory device is selected) shown in Figure 5-91 is displayed.