User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-189
Screen Field
The following message appears in the message display area.
The selecting procedure file is copied from a USB memory
device to the hard disk. When this operation is done, all
existing procedure files in hard disk are deleted.
Undo Confirmation screen (when HDD selected)
When you select HDD device on the [File Management] screen,
press the Undo softkey to restore the test setup file to the
previous condition. Then, the confirmation screen shown in this
Figure 5-90 is displayed.
NOTE
If you have saved a new file on the HDD containing some files copied
before, you can restore previous test setup files using the Undo function.
Refer to Undo Confirmation screen (when HDD selected) for details.
If copying failed, the [File Management] screen is resumed and an error
message is displayed in the message display area. Refer to Table 5-53,
“Error messages of the file management,” on page 173.
Figure 5-90 Undo Confirmation Screen (when HDD selected)