User manual

5-182 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Deleting a Test Setup File
Delete one of the parameter files with the following procedure:
1 If you delete a file containing test parameters from a USB
memory device, go to step 2. Or, go to step 3 to delete a file
from the HDD.
2 Insert a USB memory into the USB connector on the front
panel of the tester.
3 Select a device which you want to delete the test parameter
file by pressing the HDD/USB softkey. The selected device,
either
HDD or USB, is underlined.
Figure 5-84 [Configuration: File Management] Call up-3 screen
NOTE
Remove the USB memory device after returning to the [Configuration]
screen by pressing the Return softkey.
The USB memory device should not be removed while the [File
Management] screen is displayed. Otherwise, the parameter files may be
damaged.