User manual

5-180 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Calling up a test setup file
Call up a test setup file in the following procedure.
1 If you recall a file containing test parameters from a USB
memory device, go to step 2. Or, go to step 3 to recall a file
from the HDD.
2 Insert a USB memory device into the USB Connector to
obtain the parameter file list.
3 Select a device you use to recall a test parameter file by
pressing the HDD/USB softkey. The selected device, either
HDD or USB, is underlined.
4 Move the cursor to the file number to which you want to
recall the test parameter file.
5 Press the Recall softkey, and then the File Name, Date, Time and
Comment fields are highlighted.
Figure 5-82 [Configuration: File Management] Call up-1 screen