User manual

5-174 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Saving a Test Setup File
Save a new parameter file with the following procedure:
1 If you save a file including all parameters that are currently
set in a USB memory device, go to step 2. Or, go to step 3 to
save a file to the HDD.
2 Insert a USB memory device into the USB Connector on the
front panel of the Tester.
3 Select a device you want to use to save a parameter file by
toggling the HDD/USB softkey. The selected device, either
HDD
or
USB, is underlined.
4 Move the cursor to the file number to which you want to save
a new test parameter file.
5 Press the Save softkey. The File Name and Comment fields are
highlighted, and the cursor is placed at the File Name field. A
default file name will be automatically displayed in the File
Name field. If you want to change the file name, go to step 6.
If you do not change the file name, go to step 9.
Figure 5-76 [Configuration: File Management] Save-1 Screen