User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-173
Softkey Menu 2
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• File Replace HDD <- USB: This is displayed when HDD is
selected with HDD/USB softkey. Display the file copying
screen. Refer to File Replace Confirmation screen (when
HDD selected). This softkey is enabled when the following
conditions are satisfied.
•USB memory is inserted into the tester.
•There is a test setup file on HDD.
• File Replace HDD - > USB: This is displayed when USB is
selected with HDD/USB softkey. Display the screen to
confirm file copying. Refer to File Replace Confirmation
screen (USB Memory Device is selected). This softkey is
enabled when the following conditions are satisfied.
•The USB memory in which test setup files are saved
using the file replace function is inserted into the tester.
• Undo: Displays the screen to confirm Undo (operation
cancel). This softkey is enabled when the following
conditions are satisfied.
• Files already exist in the selected HDD memory.
• Files already exist in the selected USB memory.
• More (2 of 2): Returns to the Softkey Menu 1.
Message Field
When an error occurs during file copying, the following message
will be displayed in the message display area.
Table 5-53Error messages of the file management
Message Description
Procedure file Copy failure! [xxxx] [0000]: Copying failed.
[0001]: Deleting failed.
[0002]: Renaming failed.