User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-153
When the Radio System is in 1xEV-DO mode
Figure 5-68 and Figure 5-69 show the [Configuration: Test
Sequence] screen when the Radio System is set to CDMA2000
1xEV-DO mode.
Time Offset Sets execution or skip the transmission timing error measurement.
Sensitivity/ FER Sets execution or skip the Sensitivity measurement in FER. The signal output level
from the Tester and the number of test frames are set on the [Configuration: Test
Condition] screen.
Table 5-44 Input items on the [Configuration: Test Sequence] Screen (MC-1x)
Measurement Item Description
NOTE
Install the C02 option to use the test function of the 1xEV-D0 mode.
Figure 5-68 [Configuration: Test Sequence] Screen (3GPP2 Config is set to 1 or 2 (1xEV-DO Rel. 0))