User manual

5-150 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Screen Fields
Set the input items required to execute tests, referring to the
description shown in Table 5-43.
Table 5-43 Input items on the [Configuration: Test Sequence] Screen (MC-1x)
Input Item Description
Test i t e m s
Specifies execution or skip at each step. Refer to Table 5-42, Test flow item settings (MC-1x).
Radio System Radio system of Sequence No. 1 and 2.
Select it from cdma2000 MC1x and cdma2000 1xEV-DO. If you do not select radio system for the
sequence-2, set it to ——.
Sequence No Sets the sequence number to set test items.
Detail of RF Test RFCH:
Specifies the band and channel number. The allowable range of channel number for each band is as
follows:
• B0 (Cel US): 1024 to 1323CH, 991 to 1023CH, 1 to 799CH
• B1 (PCS US): 0 to 1199CH
• B3 (Cel JP): 1041 to 1199CH, 1201 to 1600CH, 801 to 1039CH, 1 to 799CH
• B4 (PCS KR): 0 to 599CH
• B6 (IMT-2K): 0 to 1199CH
Refer to Appendix B General information on cdma2000 system for details.
ATT In, ATT Out:
Set the path loss value of the coupler and cable connected from/to the mobile phone.
Refer to Actual Input/Output Level and Correction.
To en abl e c h a n g e s on ATT setting, set Loss on the [Configuration] screen to On.