User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-139
Softkey Menu 3
• Debug Data > USB: Outputs debug data into a USB memory
device.
• More (3 of 3): Returns to the Softkey Menu 1.
If option E02 is not installed, setting items for GP-IB are grayed
out (disabled) as Figure 5-65.
If option E01 is not installed, setting items for the serial port are
grayed out (disabled) as Figure 5-66.
Screen Fields
Before starting the measurement, set the input fields to use the
Tester according to the following description of Table 5-40.
Figure 5-65 Part of the [Configuration] Screen (without Option E02)
Figure 5-66 Part of the [Configuration] Screen (without Option E01)
Table 5-40 Input items on the [Configuration] Screen
Input Field Description
Procedure Specifies a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to be
used for the test.