User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-137
Configuration
Features of the Configuration Screen
In this mode, there are four major functions as follows:
• Configuration
• Test Sequence
• Test Condition
• File Management
Configuration Screen
When the Config softkey is pressed on the [Initial] screen, the
[Configuration] screen as Figure 5-64 is displayed.
Various settings for the following are set on the [Configuration]
screen.
• Test sequence of Automatic Tests
• Test parameters
• Interface setting
• Other settings
NOTE
A changing magnification softkey to input numerical values will be
enabled. Refer to
Storing Numeric Values on page 4-10 and Changing Magnification
Softkey on page 4-13.