User manual

5-132 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
• RF Output: Selects the RF power output from On and Off. RF
On
is shown at the lower left corner of screen when this
softkey is set to
On.
• System >>: Displays the Softkey Menu 2 to select a system.
• Return: Returns to the Softkey Menu 1.
Softkey Menu 2
• GSM: Changes the system to GSM. The G00 option is
required.
• W-CDMA: Changes the system to
W-CDMA. Installation for
W00 Option is required.
• CDMA2000: This softkey is unavailable.
• Cancel: Cancels selecting a system and returns to the
Softkey Menu 1.
Screen Field
Set the input fields to generate RF signal from the Tester
according to the following description of Table 5-38.
Table 5-38 Input field of the [Signal Generator] screen
Input Field Description
Procedure Specifies a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to be
used for the test.
RFCH
*
Specifies the band and channel number. The allowable range of channel number for each band is as
follows:
• B0 (Cel US): 1024 to 1323CH, 991 to 1023CH, 1 to 799CH
• B1 (PCS US): 0 to 1199CH
• B3 (Cel JP): 1041 to 1199CH, 1201 to 1600CH, 801 to 1039CH, 1 to 799CH
• B4 (PCS KR): 0 to 599CH
• B6 (IMT-2K): 0 to 1199CH
Refer to Appendix B General information on cdma2000 system for details.
Amplitude
*
Sets the RF output level. The allowable range is from -115.0 to -18.0 dBm in 0.1 dB steps.