User manual

5-120 N9360A Multi UE Tester CDMA2000 User Manual
5 Description of Screens
Measuring Screen
When measurement starts, the [Measuring] screen as shown
Figure 5-55 is displayed.
Softkey Menu Field
Softkey Menu
• Trigger Sing/Cont: Selects the trigger mode from
Sing
(single) and
Cont (continuous).
•If you select the
Cont (Continuous measurement) trigger
mode, the continuous measurement starts immediately.
•Switch the
Cont trigger mode to Sing (Single
measurement) to terminate the measurement.
Message Field
The following message is displayed in the message screen on the
[Measuring] screen:
Press the desired softkey.
Figure 5-55 [TX Analyzer: Measuring] Screen