User manual

Description of Screens 5
N9360A Multi UE Tester CDMA2000 User Manual 5-117
• Print Screen: Prints a hardcopy of the screen or saves a
graphic file of the screen in a USB memory device
depending on the setting of the Printer input field on the
[Configuration] screen.
• System >>: Displays the Softkey Menu 3 to select system.
• Code Power: Displays the [Code Domain Power]
measurement screen. It is displayed only when the
Modulation mode is NOT selected to AM Modulation 1 or
AM Modulation 2.
• More (2 of 2): Returns to the Softkey Menu 1.
Softkey Menu 3
• GSM: Changes the system to GSM. Installation of G00
Option is required.
• W-CDMA: Changes the system to W-CDMA. Installation of
W00 Option is required.
• CDMA2000>>: This softkey is unavailable.
• Cancel: Cancels selecting a system and returns to the
Softkey Menu 2.
Screen Field
Set the input fields in the screen field according to the following
description of Table 5-32 to execute a new test.
Table 5-32 Entries on the [TX Analyzer: Stand-by] Screen
Input Item Description
Measuring
mode
Sets On (measure) or Off (not measure) for each measurement item.
• TX Power
• Frequency Error
• Multi-code Rho,
• Origin Offset
• Time Offset
Procedure Specifies a parameter file to be used for the test.
This item displays the file name for the parameter file that is currently in use.
It is also possible to select a parameter file from existing parameter files and specify it as the file to be
used for the test.